|
|
|||||||
| Creative Expression Post your own works and chat about them |
 |
|
|
Thread Tools | Display Modes |
02-12-2004, 10:36 PM
|
#31 |
|
I think this line's mostly filler.
Join Date: Jan 2003
Location: DC
Posts: 13,575
|
Then we used a fancy mortise jig on the tablesaw to cut a lip into the inside top of the feet. Obviously, you don't need all the hardware to do it, but if you've got it, flaunt it.
__________________
_________________ |...............| We live in the nick of times. | Len 17, Wid 3 | |_______________| [pics] |
|
|
|
02-16-2004, 08:34 PM
|
#33 |
|
I think this line's mostly filler.
Join Date: Jan 2003
Location: DC
Posts: 13,575
|
I didn't get to do anything over the weekend, but my dad glued up the feet, smoothed over the ends, and glued in some blocks on the inner surfaces of the corners.
__________________
_________________ |...............| We live in the nick of times. | Len 17, Wid 3 | |_______________| [pics] |
|
|
|
|
02-22-2004, 08:46 AM
|
#34 |
|
I think this line's mostly filler.
Join Date: Jan 2003
Location: DC
Posts: 13,575
|
Next, we prepared the plywood backing. It is 1/8 inch birch plywood, so it is quite flimsy.
First I measured the same distance from one edge at intervals, using some scrap wood to make sure the tape measure didn't go too diagonally, then I used a straightedge to connect the dots.
__________________
_________________ |...............| We live in the nick of times. | Len 17, Wid 3 | |_______________| [pics] |
|
|
|
|
02-22-2004, 08:47 AM
|
#35 |
|
I think this line's mostly filler.
Join Date: Jan 2003
Location: DC
Posts: 13,575
|
Then I put masking tape along the line, to minimize splintering, and my dad cut it with a circular saw.
__________________
_________________ |...............| We live in the nick of times. | Len 17, Wid 3 | |_______________| [pics] |
|
|
|
|
02-22-2004, 08:49 AM
|
#36 |
|
I think this line's mostly filler.
Join Date: Jan 2003
Location: DC
Posts: 13,575
|
We then shaved it down with a (very sharp) plane, until it fit in the groove on the back of the bookshelf.
__________________
_________________ |...............| We live in the nick of times. | Len 17, Wid 3 | |_______________| [pics] |
|
|
|
|
02-22-2004, 08:51 AM
|
#37 |
|
I think this line's mostly filler.
Join Date: Jan 2003
Location: DC
Posts: 13,575
|
We ground notches in the edge with a dremmel, to allow for the bolts which will hold the backing in.
__________________
_________________ |...............| We live in the nick of times. | Len 17, Wid 3 | |_______________| [pics] |
|
|
|
|
02-22-2004, 09:44 PM
|
#40 |
|
I think this line's mostly filler.
Join Date: Jan 2003
Location: DC
Posts: 13,575
|
For the molding around the top, we routed one edge of a board, cut it off with a tablesaw, then repeated the process.
__________________
_________________ |...............| We live in the nick of times. | Len 17, Wid 3 | |_______________| [pics] |
|
|
|
|
02-22-2004, 09:47 PM
|
#41 |
|
I think this line's mostly filler.
Join Date: Jan 2003
Location: DC
Posts: 13,575
|
We also ripped off two slices from some of the spare wood from the shelves.
__________________
_________________ |...............| We live in the nick of times. | Len 17, Wid 3 | |_______________| [pics] |
|
|
|
|
02-22-2004, 09:49 PM
|
#42 |
|
I think this line's mostly filler.
Join Date: Jan 2003
Location: DC
Posts: 13,575
|
We used the chopsaw to make a angle joint in the molding, for the corner.
__________________
_________________ |...............| We live in the nick of times. | Len 17, Wid 3 | |_______________| [pics] |
|
|
|
|
02-22-2004, 09:54 PM
|
#43 |
|
I think this line's mostly filler.
Join Date: Jan 2003
Location: DC
Posts: 13,575
|
For perfect placement, we wanted to place the molding while the frame was together. The masking tape is to avoid unwanted gluing.
__________________
_________________ |...............| We live in the nick of times. | Len 17, Wid 3 | |_______________| [pics] |
|
|
|
|
02-22-2004, 09:56 PM
|
#44 |
|
I think this line's mostly filler.
Join Date: Jan 2003
Location: DC
Posts: 13,575
|
And then we glued it. Once the glue got a bit solid, the excess glue was scraped off with a chisel.
whee! post 500!
__________________
_________________ |...............| We live in the nick of times. | Len 17, Wid 3 | |_______________| [pics] Last edited by Happy Monkey; 02-23-2004 at 09:55 AM. |
|
|
|
|
02-22-2004, 10:48 PM
|
#45 |
|
I can hear my ears
Join Date: Oct 2003
Posts: 25,571
|
man, monkey. you guys don;t fuck around, do you? very precise work. I'm very impressed. Dad's got a pretty mean tool set, too, huh?
some day, baby, some day. tell your pop he's my hero, and keep the pics coming!
__________________
This body holding me reminds me of my own mortality Embrace this moment, remember We are eternal, all this pain is an illusion ~MJKeenan |
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
