What's upsetting you today? - Page 401

anonymous · 12-06-2010, 01:06 PM

Quote:

Originally Posted by Shawnee123

I've always wondered what it would be like to be those kind of people who can just go out and get new major appliances when they need to. So, what's that like?

It's Great!

Shawnee123 · 12-06-2010, 01:06 PM

The freezer is on top. So does that mean that they would both be "working" but not working very well?

I wonder if "coils" or whatever need cleaned?

HELP!

Spexxvet · 12-06-2010, 01:42 PM

Quote:

Originally Posted by Nirvana

The main line from the box to my water heater has a short gahhhhhhh!

Quote:

Originally Posted by Shawnee123

Could you get a gahhhhhhh lengthener?

...

Haggis! x2

glatt · 12-06-2010, 01:51 PM

Couldn't hurt to clean the coils. You just vacuum the dust bunnies off them. They are usually underneath, but could also be on the back. They are just little radiators that look like wire racks. (To get to them if they are underneath, there should be a pull off plastic grill that you just easily pop off and then push back on)

It could also be that you have a freezer that's packed so full, it's blocking the vents that lead down into the refrigerator part. Pull frozen food away from the sides and especially rear of the freezer, and see if that helps cool the fridge part.

I'm assuming you hear the thing running. Does it run all the time? Or does it only run every once in a while? I'm also assuming you already checked that you didn't accidentally bump the thermostat and set the thing to a warmer temperature.

That's about it for things you can do yourself. Oh, and see if plugging it into a different outlet (via a heavy duty extension cord) makes it work. You could have a wiring problem and not an appliance problem.

Worst case is that the compressor motor is shot or the system has a refrigerant leak.

Shawnee123 · 12-06-2010, 01:58 PM

Hey, thanks so much. I'll try cleaning the coils. I know my freezer isn't packed full but I can't be sure there isn't something in there blocking any vents. I would not have know to look for something like that.

I did check the thermostat.

I would be so happy if I could just get it working again, even if that is short-lived, until I can look into buying a new one.

Thanks again!

monster · 12-06-2010, 09:19 PM

Craigslist.

footfootfoot · 12-06-2010, 11:15 PM

Quote:

Originally Posted by Shawnee123

Hey, thanks so much. I'll try cleaning the coils.

Careful not to shuffle them, I heard it can be bad.

plthijinx · 12-07-2010, 12:20 AM

my freakin' truck. going down the freeway at 70mph, cruise control on and all of a sudden it slips into neutral. or acts like it anyway. automatic transmission. i have 1st and 2nd gear. if i push the overdrive off button then it will at least stay in second gear and not slip out. wtf? any ideas? is it a bad TC or possibly a sensor?

plthijinx · 12-07-2010, 12:21 AM

built ford tough. my ass. last ford pickup i'll ever buy.

morethanpretty · 12-08-2010, 08:10 AM

Final project for drama class. It was a group assignment and we had like 3 weeks to work on it. First 2 weeks, the group member who was supposed to write the script, wasn't. So last week I finally said I would. I got it done on Saturday and we filmed the thing. Then one of the other members was supposed to edit it. She had Sun, Mon, and Tues morning. I asked her repeatedly if she could and if it was OK. Even Monday night before I went to bed, I texted her one last time. She assured me it was OK. Tues morning at 9:50 I get an message from her, "Uhm, things didn't turn out so well." Class is at 10. Come to find out, she couldn't even get the video off of the camcorder to the PC.
The camcorder will play on a TV, but the miniDV we used is FUBR and won't finalize so it can be transferred to a PC. If she had told me before hand she couldn't at all get it to work, I couldv'e looked at it, figured out it was FUBR and we could've reshot the film, or filmed it off of the TV....at least had something to turn in in the class. So now, I have to fix it, edit it and turn it in on Thurs. Fortunately I talked to the prof, and I don't think she's gonna count me off for it being late since she knows that its not my fault. But its extra work I shouldn't have to be doing damnit. Oh, and since the miniDV is FUBR, and the vid can't be downloaded straight to the PC, I'm gonna have to refilm it from the TV. Its gonna look awesome...

Shawnee123 · 12-08-2010, 08:31 AM

I wonder if that's how Tarantino started out. Or was it Ed Wood?

Good luck, mtp. You'll get it together.

morethanpretty · 12-08-2010, 09:42 AM

I know, but I've gotten through the last 2 weeks by telling myself. "Ok, you'll be done on Wed after your last final which is a breeze. Just hold on until then, then you can go nuts." So at this point my sanity is hanging on by a thread, and I was supposed to be DONE by 5:30 tonight...but it turns out I'm not.

Its very very disappointing.
I think I'm still gonna get drunk...as soon as I get done with editing.

Shawnee123 · 12-10-2010, 12:01 PM

I'm so glad the pubes, I mean 'pubs, are back in town.

Thanks for nuttin', Kasich. Blowhard.

"WE gots other stuff we want to spend money on, he said (read: we wanted the money to go into our buddy's pockets.) We can't afford it, he said (read: we don't want to create jobs on the line itself, or in manufacturing of the line, or servicing the line, or in selling popcorn to people riding the line, or ways people could possibly commute to another city for a job.) Can we keep the money anyway, he said?"

NO, dumbass, you can't keep the money. Here you go, California. And here's some for you Florida. You can have it. Fuck a bunch of Ohio: maybe we can get everyone to leave the god-forsaken state.

Dick fucking fucking dick asshole.

http://politicalticker.blogs.cnn.com...ohio/?hpt=Sbin

morethanpretty · 12-10-2010, 12:46 PM

Quote:

Originally Posted by Shawnee123

I'm so glad the pubes, I mean 'pubs, are back in town.

Thanks for nuttin', Kasich. Blowhard.

"WE gots other stuff we want to spend money on, he said (read: we wanted the money to go into our buddy's pockets.) We can't afford it, he said (read: we don't want to create jobs on the line itself, or in manufacturing of the line, or servicing the line, or in selling popcorn to people riding the line, or ways people could possibly commute to another city for a job.) Can we keep the money anyway, he said?"

NO, dumbass, you can't keep the money. Here you go, California. And here's some for you Florida. You can have it. Fuck a bunch of Ohio: maybe we can get everyone to leave the god-forsaken state.

Dick fucking fucking dick asshole.

http://politicalticker.blogs.cnn.com...ohio/?hpt=Sbin

OUCH! I agree with your

.

zippyt · 12-12-2010, 03:08 PM

Country eggs !!!

12-06-2010, 01:06 PM	#6002
Shawnee123 Why, you're a regular Alfred E Einstein, ain't ya? Join Date: Jun 2006 Posts: 21,206	The freezer is on top. So does that mean that they would both be "working" but not working very well? I wonder if "coils" or whatever need cleaned? HELP! __________________ A word to the wise ain't necessary - it's the stupid ones who need the advice. --Bill Cosby

12-06-2010, 01:58 PM	#6005
Shawnee123 Why, you're a regular Alfred E Einstein, ain't ya? Join Date: Jun 2006 Posts: 21,206	Hey, thanks so much. I'll try cleaning the coils. I know my freezer isn't packed full but I can't be sure there isn't something in there blocking any vents. I would not have know to look for something like that. I did check the thermostat. I would be so happy if I could just get it working again, even if that is short-lived, until I can look into buying a new one. Thanks again! __________________ A word to the wise ain't necessary - it's the stupid ones who need the advice. --Bill Cosby

12-06-2010, 09:19 PM	#6006
monster I hear them call the tide Join Date: Dec 2005 Location: Perpetual Chaos Posts: 30,852	Craigslist. __________________ The most difficult thing is the decision to act, the rest is merely tenacity Amelia Earhart

12-07-2010, 12:20 AM	#6008
plthijinx Master Dwellar Join Date: Aug 2003 Posts: 4,197	my freakin' truck. going down the freeway at 70mph, cruise control on and all of a sudden it slips into neutral. or acts like it anyway. automatic transmission. i have 1st and 2nd gear. if i push the overdrive off button then it will at least stay in second gear and not slip out. wtf? any ideas? is it a bad TC or possibly a sensor? __________________ For your dreams to come true, you must first have a dream.

12-07-2010, 12:21 AM	#6009
plthijinx Master Dwellar Join Date: Aug 2003 Posts: 4,197	built ford tough. my ass. last ford pickup i'll ever buy. __________________ For your dreams to come true, you must first have a dream.

12-06-2010, 01:51 PM	#6004
glatt ™ Join Date: Jul 2003 Location: Arlington, VA Posts: 27,717	Couldn't hurt to clean the coils. You just vacuum the dust bunnies off them. They are usually underneath, but could also be on the back. They are just little radiators that look like wire racks. (To get to them if they are underneath, there should be a pull off plastic grill that you just easily pop off and then push back on) It could also be that you have a freezer that's packed so full, it's blocking the vents that lead down into the refrigerator part. Pull frozen food away from the sides and especially rear of the freezer, and see if that helps cool the fridge part. I'm assuming you hear the thing running. Does it run all the time? Or does it only run every once in a while? I'm also assuming you already checked that you didn't accidentally bump the thermostat and set the thing to a warmer temperature. That's about it for things you can do yourself. Oh, and see if plugging it into a different outlet (via a heavy duty extension cord) makes it work. You could have a wiring problem and not an appliance problem. Worst case is that the compressor motor is shot or the system has a refrigerant leak.

12-08-2010, 08:10 AM	#6010
morethanpretty Thats "Miss Zipper Neck" to you. Join Date: Sep 2006 Location: little town (but not the littlest) in texas Posts: 2,957	Final project for drama class. It was a group assignment and we had like 3 weeks to work on it. First 2 weeks, the group member who was supposed to write the script, wasn't. So last week I finally said I would. I got it done on Saturday and we filmed the thing. Then one of the other members was supposed to edit it. She had Sun, Mon, and Tues morning. I asked her repeatedly if she could and if it was OK. Even Monday night before I went to bed, I texted her one last time. She assured me it was OK. Tues morning at 9:50 I get an message from her, "Uhm, things didn't turn out so well." Class is at 10. Come to find out, she couldn't even get the video off of the camcorder to the PC. The camcorder will play on a TV, but the miniDV we used is FUBR and won't finalize so it can be transferred to a PC. If she had told me before hand she couldn't at all get it to work, I couldv'e looked at it, figured out it was FUBR and we could've reshot the film, or filmed it off of the TV....at least had something to turn in in the class. So now, I have to fix it, edit it and turn it in on Thurs. Fortunately I talked to the prof, and I don't think she's gonna count me off for it being late since she knows that its not my fault. But its extra work I shouldn't have to be doing damnit. Oh, and since the miniDV is FUBR, and the vid can't be downloaded straight to the PC, I'm gonna have to refilm it from the TV. Its gonna look awesome... __________________ Addicts may suck dick for coke, but love came up with the idea to put a dick in there to begin with. -Jack O'Brien

12-08-2010, 08:31 AM	#6011
Shawnee123 Why, you're a regular Alfred E Einstein, ain't ya? Join Date: Jun 2006 Posts: 21,206	I wonder if that's how Tarantino started out. Or was it Ed Wood? Good luck, mtp. You'll get it together. __________________ A word to the wise ain't necessary - it's the stupid ones who need the advice. --Bill Cosby

12-08-2010, 09:42 AM	#6012
morethanpretty Thats "Miss Zipper Neck" to you. Join Date: Sep 2006 Location: little town (but not the littlest) in texas Posts: 2,957	I know, but I've gotten through the last 2 weeks by telling myself. "Ok, you'll be done on Wed after your last final which is a breeze. Just hold on until then, then you can go nuts." So at this point my sanity is hanging on by a thread, and I was supposed to be DONE by 5:30 tonight...but it turns out I'm not. Its very very disappointing. I think I'm still gonna get drunk...as soon as I get done with editing. __________________ Addicts may suck dick for coke, but love came up with the idea to put a dick in there to begin with. -Jack O'Brien

12-10-2010, 12:01 PM	#6013
Shawnee123 Why, you're a regular Alfred E Einstein, ain't ya? Join Date: Jun 2006 Posts: 21,206	I'm so glad the pubes, I mean 'pubs, are back in town. Thanks for nuttin', Kasich. Blowhard. "WE gots other stuff we want to spend money on, he said (read: we wanted the money to go into our buddy's pockets.) We can't afford it, he said (read: we don't want to create jobs on the line itself, or in manufacturing of the line, or servicing the line, or in selling popcorn to people riding the line, or ways people could possibly commute to another city for a job.) Can we keep the money anyway, he said?" NO, dumbass, you can't keep the money. Here you go, California. And here's some for you Florida. You can have it. Fuck a bunch of Ohio: maybe we can get everyone to leave the god-forsaken state. Dick fucking fucking dick asshole. http://politicalticker.blogs.cnn.com...ohio/?hpt=Sbin __________________ A word to the wise ain't necessary - it's the stupid ones who need the advice. --Bill Cosby

12-12-2010, 03:08 PM	#6015
zippyt LONG LIVE KING ZIPPY! per Feetz Join Date: Mar 2003 Location: Arkansas Posts: 7,661	Country eggs !!! Attached Images __________________ "Success is getting what you want. Happiness is wanting what you get. " Brother Dave Gardner

Currently Active Users Viewing This Thread: 29 (0 members and 29 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode