|
Home Base A starting point, and place for threads don't seem to belong anywhere else |
|
Thread Tools | Display Modes |
|
07-19-2007, 07:42 PM | #1 | |
Goon Squad Leader
Join Date: Nov 2004
Location: Seattle
Posts: 27,063
|
Are you handy?
Do you like fixing things? Do you have a list of Honey-Dos? Does the prospect of a new project bring a smile to your face? Is it because you'll have the chance to get a new tool for the job? Do you have more time than money?
Would you rather hire out your projects? Are you a menace and a danger to yourself and others when it comes to tools? Do you usually hit the wrong nail? I'm handy. I know others here that are too, footfootfoot, busterb, and zippyt come to mind, and I am certain there are others. I recently came across this continuum: Quote:
My latest project is a new roof. I **HATE** working on ladders and on the roof. It's a long way down, and the sudden stop at the end and all that. I just hate it. But I'm a cheap bastard, and I do like working on stuff, and, well, the (remaining tatters of the) tarp on the roof just had to come down. The tarp served its purpose for the emergency coverage during the winter after our terrible windstorms, and although the roof wasn't leaking during our lovely July weather, it was time to make my move. Being cheap, I opted for a re-roof instead of a tear off. The tear off, which it will need next time, would have meant a lot of additional expense in hauling the old roofs away, plus, since the original shake shingles were attached (in 1938) to what's called skip sheathing, I would also have to replace the decking with plywood or OSB. I was not ready for that level of involvement. In the course of researching this smaller scope project, I did find some nice answers and ideas about re-decking the roof one 4-foot wide swath across the rake at a time. That's much much more imaginable than stripping the whole thing off down to the bare rafters across the whole house and then decking it out. But I digress. As I said, being cheap, I opted for roll roofing. I know this will be a short term temporary roof, say, five years or so. Plus, once you get going, you can really cover some territory with that stuff. So I went and bought enough for the south face of the roof, seven rolls. Plus two rolls of 15 pound roofing paper, five one pound boxes of two inch galvanized roofing nails (no five pound boxes in the two inch length), a big box of button nails for the roofing paper, a gallon of roofing asphalt cement and four one inch cheapo brushes--$250. I also hired my nephew for five hours, another $50. On Sunday, we got all the materials home, then up on the roof. We tore off all the old tarp and battens, swept it very clean, rolled out the paper. We tacked the paper down with the button nails. That took all day. In the hot clear weather, the roof was so hot it was impossible to sit on or touch for more than a minute. By the end of the day, all the paper was installed and we returned to Earth with no injuries. Monday, after work, I read about the next step. I had to cut nine inch strips from the roll, some fifty of them. Then the next three days after work I spent on the roof, nailing the strips to the edges of the roof. This represents a LOT of nailing. The instructions said to nail these strips to the roof with two rows of nails one inch in from the edges, four inches apart. I don't have a nailgun, this was all old skool hammertime, with the occasional holiday to the the nail on my left thumb. Ouch. So last night, I finished the last strip and the whole perimeter is now "shingled" so to speak. This surface, very securely nailed to the roof, will be liberally coated with roofing cement, and the downstream edge of the strip of shingle. The upper edge is nailed to the roof, and it becomes the lower edge to be cemented to by the next higher course. The first strip of actual roofing material will be applied tonight. If I can get out of here, that is. More updates, and possibly a picture or two next time.
__________________
Be Just and Fear Not. |
|
07-19-2007, 08:10 PM | #2 |
Banned - Self Imposed
Join Date: Dec 2005
Posts: 1,847
|
Very cool - I would put myself at a 3-ish. I am definitely into doing new things and love to see what others have done. Looking at their work inspires me.
|
07-19-2007, 08:30 PM | #3 |
The future is unwritten
Join Date: Oct 2002
Posts: 71,105
|
All that work for 5 years?
Couldn't you design a roofing merit badge?
__________________
The descent of man ~ Nixon, Friedman, Reagan, Trump. |
07-19-2007, 08:33 PM | #4 |
Lecturer
Join Date: Jun 2007
Posts: 945
|
5 years at only $60/year. Not bad at all. Good job, BigV.
|
07-19-2007, 08:51 PM | #5 |
The future is unwritten
Join Date: Oct 2002
Posts: 71,105
|
$60 and a hell of a lot of work he'll have to undo, then do over, when he's 5 years older. Doesn't sound efficient to me.
__________________
The descent of man ~ Nixon, Friedman, Reagan, Trump. |
07-19-2007, 09:03 PM | #6 |
Come on, cat.
Join Date: Nov 2003
Location: general vicinity of Philadelphia area
Posts: 7,013
|
Good job V. We have a roofer in the family, but since he's fallen off twice he doesn't often go up on roofs anymore... (broken pelvis smarts)
We need a new one ourselves. No re-roof here unfortunately, as jim has his heart set on copper (or at least metal) and we need new rafters on half the house. Not looking forward to that bill....
__________________
Crying won't help you, praying won't do you no good. |
07-19-2007, 09:00 PM | #7 |
Lecturer
Join Date: Jun 2007
Posts: 945
|
Obviously a lot of satisfaction goes along with the work for someone like BigV, though. Efficient? Maybe it is for him, what with the enjoyment factored into it. I couldn't say for sure, since I'd only be about a 1.2 on the scale.
|
07-19-2007, 09:09 PM | #8 |
Vice-President of Resentment
Join Date: Apr 2007
Location: Central Illinois
Posts: 199
|
I'd rather work overtime to pay someone to do it. Then if the wife isn't happy with the finished product, it isn't my fault.
__________________
I don't need a whole lottsa money. I don't need a big fine car. |
07-19-2007, 09:31 PM | #9 | |
The future is unwritten
Join Date: Oct 2002
Posts: 71,105
|
Quote:
Roofing is not fun. Why do you think roofers will lie, cheat and kill, to get a job in the Union Hall?
__________________
The descent of man ~ Nixon, Friedman, Reagan, Trump. |
|
07-19-2007, 09:09 PM | #10 |
NSABFD
Join Date: Jul 2004
Location: MS. usa
Posts: 3,908
|
Hey V 5 years is great. Me, I might not be around then. What me worry?
__________________
I've haven't left very deep footprints in the sands of time. But, boy I've left a bunch. |
07-19-2007, 10:37 PM | #11 |
Your Bartender
Join Date: Jan 2002
Location: Philly Burbs, PA
Posts: 7,651
|
We just recently laid out $$$$ for the roof. (Not only the roof, but we had to get a couple overgrown trees pruned back before we could do that, and then we discovered that the roof of the back porch had separated from the house.....)
Anyway, I'm very good at assembling pieces. If I have to change the pieces... like, say, drill a hole in the wall... cut a piece of wood down to size... etc. ... it's usually trouble. Big trouble. We tore up the carpet in our living room and dining room last year. It was really crappy, and we had essentially been waiting for the kids to grow past the stage of messing it up. (We now know this will never pass.) We suspected there were very nice hardwood floors under, and there were. But now I need to put in some molding down at the baseboard. Should be interesting.... |
07-19-2007, 10:59 PM | #12 |
The future is unwritten
Join Date: Oct 2002
Posts: 71,105
|
Go for a nautical theme and put rope along the baseboard.
__________________
The descent of man ~ Nixon, Friedman, Reagan, Trump. |
07-23-2007, 10:25 PM | #13 |
Your Bartender
Join Date: Jan 2002
Location: Philly Burbs, PA
Posts: 7,651
|
I've done worse. (Only half the dining room so far... we were moving stuff around to accommodate a new china cabinet, and it seemed silly to not do it while the space was empty.)
|
07-23-2007, 11:31 PM | #14 |
Banned - Self Imposed
Join Date: Dec 2005
Posts: 1,847
|
OK handy people - I have finished the kitchen, front window, pergo flooring in the dining area, replaced 6 doors, skim coated the entire downstairs and the painting has commenced. (Pics to folow if I can figure out the camera) My question is that I'm thinking of installing a vent fan in the attic. The one that goes out the roof. I'm fine indoors, but cutting a hole in my roof scares the hell outta me. Any help, suggestions tips and so on?
|
07-24-2007, 09:00 AM | #15 |
™
Join Date: Jul 2003
Location: Arlington, VA
Posts: 27,717
|
Why a roof fan? Is this to ventilate the attic to reduce cooling costs? Or is this to vent a bathroom, or kitchen stove, etc.?
|
Tags |
diy |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|