There's lumberthing I want to tell you - Page 113

xoxoxoBruce · 11-13-2019, 11:34 PM

You could have cut the baseboard and set your frame flush with the wall. I mean you're never going to move the machines back to the cellar.
Are you moving that outlet out to the face of your construction?

lumberjim · 11-14-2019, 12:17 AM

Good eye, Bruce. No, we're gonna put a little door on the right side face of that base so we can get to it if we need it. (read Amanda reaching in there) With a notch to allow it to close with wires plugged in. ... At first, I was thinking 3/8" sheet rock, but now I'm thinking Luan cladding on the outside with molding on the edges.

Griff · 11-14-2019, 06:59 AM

Excellent!

glatt · 11-14-2019, 12:50 PM

Is that an optical illusion, that the rear horizontal member of the lower box hiding the pipes looks like it's not even close to being level?

Otherwise, it looks like it's going to be really good. That's a nice space there right by the door. Just screaming for something to be built in.

xoxoxoBruce · 11-14-2019, 03:01 PM

There's a guy up near Binghamton that can make beautiful boards.

lumberjim · 11-14-2019, 04:22 PM

Quote:

Originally Posted by glatt

Is that an optical illusion, that the rear horizontal member of the lower box hiding the pipes looks like it's not even close to being level?

Otherwise, it looks like it's going to be really good. That's a nice space there right by the door. Just screaming for something to be built in.

It is an illusion. that back cross piece goes diagonal, and the stud is sitting on it.

lumberjim · 11-14-2019, 04:24 PM

Quote:

Originally Posted by xoxoxoBruce

There's a guy up near Binghamton that can make beautiful boards.

i was toying with the idea of creating my own molding ,but I think it will be more cost effective to buy it. I have a router table and the bits I would need... but the time it would take is prohibitive.

Griff · 11-14-2019, 05:38 PM

and my boards are a year away

captainhook455 · 11-14-2019, 07:41 PM

I hope this carpentry is done before I get up there again. I am allergic to dust unless it is in my pipe. Keep up the good work dude.

Sent from my moto g(7) supra using Tapatalk

lumberjim · 11-14-2019, 10:20 PM

monster · 11-14-2019, 10:37 PM

Quote:

Originally Posted by lumberjim

Been working on concealing the supply and drain pipes from the washing machine relocation.

Now I'm pondering putting shelves into the columns. Either the inside or face.....
Or maybe just trim it out with molding and make the shelves inside the boxed in columns afterwards. I'm going to mount a row of coat hooks on the wall and put a bench between the low boxes with shoe cubbies or drawers or under it. There will be a sophet across the top, and shelves hung from that. The ceiling is 9'. The sophet will be 12", so maybe 18" below the bottom will look good and be useful.

Maybe you could put hooks or clips for wet accessories -hats, gloves, umbrellas...... on the columns? And other entry/exit sundries.....I dunno how much snow you get there, but in winter it's a pain in the ass finding somewhere to dry those things without taking up coat hooks, and we always find it useful to have supplies of towels near the door for both floor mopping and person mopping. Yes, we need a mudroom.

Little shelves in the columns sounds helpful too, perhaps to hold small baskets for the sundries that always end up by the door if not kept in check...... Sunblock in summer. maybe bug spray... Pepper Spray for the JW.....

xoxoxoBruce · 11-15-2019, 12:02 AM

Quote:

Originally Posted by lumberjim

i was toying with the idea of creating my own molding ,but I think it will be more cost effective to buy it.

I agree, molding is a pain in the ass even with long clear straight grained wood (if you can find it) and a shaper. Store bought is where it's at.

glatt · 11-15-2019, 08:56 AM

Nice detail shot there. Now I see why it was an optical illusion.

Quote:

Originally Posted by monster

we always find it useful to have supplies of towels near the door for both floor mopping and person mopping.

The glatt household has a big folded beach towel on the floor by the front door for most of the winter. The boots dry there and the melting snow in the treads has someplace to go instead of all over the wood floor.

lumberjim · 11-15-2019, 10:07 AM

Google built in hall mud room coat rack to see lots of cool ideas. Like this kind of...

glatt · 11-15-2019, 10:44 AM

You're probably thinking of this already, but I would encourage you to try to mimic the molding on and around the front door as much as reasonably possible to make it look like it has always been there.

11-13-2019, 11:34 PM	#1681
xoxoxoBruce The future is unwritten Join Date: Oct 2002 Posts: 71,105	You could have cut the baseboard and set your frame flush with the wall. I mean you're never going to move the machines back to the cellar. Are you moving that outlet out to the face of your construction? __________________ The descent of man ~ Nixon, Friedman, Reagan, Trump.

11-14-2019, 12:17 AM	#1682
lumberjim I can hear my ears Join Date: Oct 2003 Posts: 25,571	Good eye, Bruce. No, we're gonna put a little door on the right side face of that base so we can get to it if we need it. (read Amanda reaching in there) With a notch to allow it to close with wires plugged in. ... At first, I was thinking 3/8" sheet rock, but now I'm thinking Luan cladding on the outside with molding on the edges. __________________ This body holding me reminds me of my own mortality Embrace this moment, remember We are eternal, all this pain is an illusion ~MJKeenan

11-14-2019, 06:59 AM	#1683
Griff still says videotape Join Date: Feb 2001 Posts: 26,813	Excellent! __________________ If you would only recognize that life is hard, things would be so much easier for you. - Louis D. Brandeis

11-14-2019, 03:01 PM	#1685
xoxoxoBruce The future is unwritten Join Date: Oct 2002 Posts: 71,105	There's a guy up near Binghamton that can make beautiful boards. __________________ The descent of man ~ Nixon, Friedman, Reagan, Trump.

11-14-2019, 05:38 PM	#1688
Griff still says videotape Join Date: Feb 2001 Posts: 26,813	and my boards are a year away __________________ If you would only recognize that life is hard, things would be so much easier for you. - Louis D. Brandeis

11-14-2019, 12:50 PM	#1684
glatt ™ Join Date: Jul 2003 Location: Arlington, VA Posts: 27,717	Is that an optical illusion, that the rear horizontal member of the lower box hiding the pipes looks like it's not even close to being level? Otherwise, it looks like it's going to be really good. That's a nice space there right by the door. Just screaming for something to be built in.

11-14-2019, 07:41 PM	#1689
captainhook455 Rapscallion Join Date: Aug 2016 Posts: 1,357	I hope this carpentry is done before I get up there again. I am allergic to dust unless it is in my pipe. Keep up the good work dude. Sent from my moto g(7) supra using Tapatalk

11-14-2019, 10:20 PM	#1690
lumberjim I can hear my ears Join Date: Oct 2003 Posts: 25,571	__________________ This body holding me reminds me of my own mortality Embrace this moment, remember We are eternal, all this pain is an illusion ~MJKeenan

11-15-2019, 10:07 AM	#1694
lumberjim I can hear my ears Join Date: Oct 2003 Posts: 25,571	Google built in hall mud room coat rack to see lots of cool ideas. Like this kind of... __________________ This body holding me reminds me of my own mortality Embrace this moment, remember We are eternal, all this pain is an illusion ~MJKeenan

11-15-2019, 10:44 AM	#1695
glatt ™ Join Date: Jul 2003 Location: Arlington, VA Posts: 27,717	You're probably thinking of this already, but I would encourage you to try to mimic the molding on and around the front door as much as reasonably possible to make it look like it has always been there.

Currently Active Users Viewing This Thread: 6 (0 members and 6 guests)