There's lumberthing I want to tell you - Page 121

xoxoxoBruce · 01-25-2020, 10:15 PM

I used one of them in a single car garage until I loaned to someone and never saw it again.

Hopalong48 · 01-26-2020, 10:24 AM

I think thats the same guy I loaned my post hole digger to.

Sent from my SM-G975U using Tapatalk

Hopalong48 · 01-26-2020, 10:27 AM

I just have a small garage but I bought this heater for $40 on letgo. it was like new. It is unvented though. but it will put out some heat and it has a blower on it. a weak one.

Sent from my SM-G975U using Tapatalk

xoxoxoBruce · 01-26-2020, 05:24 PM

Is that gas fired?

Hopalong48 · 01-26-2020, 06:52 PM

Yes, I run a gas pipe out of the basement, and used 120V for the blower, it has a pilot light so it will light without electric service.

Sent from my SM-G975U using Tapatalk

lumberjim · 01-26-2020, 09:39 PM

Harbor freight had a coupon for their workbench. It has a vise and 4 drawers. I'd been planning on building a bench, and the cost of the materials would have been more than their price, so I got two.

I might add a few inches to the height, but as it is, it's a good work space. Almost like an office.

Man cave is coming together.

xoxoxoBruce · 01-26-2020, 10:36 PM

Just what you need, two more vices.

Those are nice, be a pleasure to use. I have a 4x8 table at normal height, about 33 or 34 inches since I'm short and wanted to be able to lean over to reach things without laying on them. Then the work bench I built is about 10 inches higher so I don't have to lean over to say assemble a carburetor or something.
You're tall so my set up wouldn't work for you, but you can tailor your stuff to what's comfortable. There's no reason you have to suffer for your art.

Griff · 01-27-2020, 06:07 AM

I'm just gonna go ahead and validate your man card.

Undertoad · 01-27-2020, 12:03 PM

Hey what kind of outlet did the electrician put in for you?

xoxoxoBruce · 01-27-2020, 12:20 PM

Most likely hard wired.

lumberjim · 01-27-2020, 01:30 PM

right..the heater is wired directly to the box. If I want to, I can add an outlet like you'd have for your dryer. Or hard wire another 240v machine.

lumberjim · 01-29-2020, 04:10 PM

Just one day out here and it's a mess already.

I gave the benches an extra 3.5". If you zoom, you might be able to see that I routed the tops of the 4x4s to make them pretty.

I also sunk leveling feet in the front of the forward facing bench because the garage floor starts to grade away there. I put the sjobergs vise in the corner, clamped the benches together underneath and started making sawdust.

The tangle of clamps are on a mailbox I'm making.

lumberjim · 01-29-2020, 07:02 PM

Happy Monkey · 01-29-2020, 07:47 PM

Nice! I only ever did half-hearted carving.

lumberjim · 01-29-2020, 08:14 PM

Amanda seems dubious. It's taken an afternoon to get half way on the 8. Springfield Avenue could take a year.

01-25-2020, 10:15 PM	#1801
xoxoxoBruce The future is unwritten Join Date: Oct 2002 Posts: 71,105	I used one of them in a single car garage until I loaned to someone and never saw it again. __________________ The descent of man ~ Nixon, Friedman, Reagan, Trump.

01-26-2020, 05:24 PM	#1804
xoxoxoBruce The future is unwritten Join Date: Oct 2002 Posts: 71,105	Is that gas fired? __________________ The descent of man ~ Nixon, Friedman, Reagan, Trump.

01-26-2020, 09:39 PM	#1806
lumberjim I can hear my ears Join Date: Oct 2003 Posts: 25,571	Harbor freight had a coupon for their workbench. It has a vise and 4 drawers. I'd been planning on building a bench, and the cost of the materials would have been more than their price, so I got two. I might add a few inches to the height, but as it is, it's a good work space. Almost like an office. Man cave is coming together. __________________ This body holding me reminds me of my own mortality Embrace this moment, remember We are eternal, all this pain is an illusion ~MJKeenan

01-26-2020, 10:36 PM	#1807
xoxoxoBruce The future is unwritten Join Date: Oct 2002 Posts: 71,105	Just what you need, two more vices. Those are nice, be a pleasure to use. I have a 4x8 table at normal height, about 33 or 34 inches since I'm short and wanted to be able to lean over to reach things without laying on them. Then the work bench I built is about 10 inches higher so I don't have to lean over to say assemble a carburetor or something. You're tall so my set up wouldn't work for you, but you can tailor your stuff to what's comfortable. There's no reason you have to suffer for your art. __________________ The descent of man ~ Nixon, Friedman, Reagan, Trump.

01-27-2020, 06:07 AM	#1808
Griff still says videotape Join Date: Feb 2001 Posts: 26,813	I'm just gonna go ahead and validate your man card. __________________ If you would only recognize that life is hard, things would be so much easier for you. - Louis D. Brandeis

01-26-2020, 10:24 AM	#1802
Hopalong48 Colloquialist Join Date: Oct 2018 Posts: 76	I think thats the same guy I loaned my post hole digger to. Sent from my SM-G975U using Tapatalk

01-26-2020, 10:27 AM	#1803
Hopalong48 Colloquialist Join Date: Oct 2018 Posts: 76	I just have a small garage but I bought this heater for $40 on letgo. it was like new. It is unvented though. but it will put out some heat and it has a blower on it. a weak one. Sent from my SM-G975U using Tapatalk

01-26-2020, 06:52 PM	#1805
Hopalong48 Colloquialist Join Date: Oct 2018 Posts: 76	Yes, I run a gas pipe out of the basement, and used 120V for the blower, it has a pilot light so it will light without electric service. Sent from my SM-G975U using Tapatalk

01-27-2020, 12:03 PM	#1809
Undertoad Radical Centrist Join Date: Jan 2001 Location: Cottage of Prussia Posts: 31,423	Hey what kind of outlet did the electrician put in for you?

01-27-2020, 12:20 PM	#1810
xoxoxoBruce The future is unwritten Join Date: Oct 2002 Posts: 71,105	Most likely hard wired. __________________ The descent of man ~ Nixon, Friedman, Reagan, Trump.

01-27-2020, 01:30 PM	#1811
lumberjim I can hear my ears Join Date: Oct 2003 Posts: 25,571	right..the heater is wired directly to the box. If I want to, I can add an outlet like you'd have for your dryer. Or hard wire another 240v machine. __________________ This body holding me reminds me of my own mortality Embrace this moment, remember We are eternal, all this pain is an illusion ~MJKeenan

01-29-2020, 04:10 PM	#1812
lumberjim I can hear my ears Join Date: Oct 2003 Posts: 25,571	Just one day out here and it's a mess already. I gave the benches an extra 3.5". If you zoom, you might be able to see that I routed the tops of the 4x4s to make them pretty. I also sunk leveling feet in the front of the forward facing bench because the garage floor starts to grade away there. I put the sjobergs vise in the corner, clamped the benches together underneath and started making sawdust. The tangle of clamps are on a mailbox I'm making. __________________ This body holding me reminds me of my own mortality Embrace this moment, remember We are eternal, all this pain is an illusion ~MJKeenan

01-29-2020, 07:02 PM	#1813
lumberjim I can hear my ears Join Date: Oct 2003 Posts: 25,571	__________________ This body holding me reminds me of my own mortality Embrace this moment, remember We are eternal, all this pain is an illusion ~MJKeenan

01-29-2020, 07:47 PM	#1814
Happy Monkey I think this line's mostly filler. Join Date: Jan 2003 Location: DC Posts: 13,575	Nice! I only ever did half-hearted carving. __________________ _________________ \|...............\| We live in the nick of times. \| Len 17, Wid 3 \| \|_______________\| [pics]

01-29-2020, 08:14 PM	#1815
lumberjim I can hear my ears Join Date: Oct 2003 Posts: 25,571	Amanda seems dubious. It's taken an afternoon to get half way on the 8. Springfield Avenue could take a year. __________________ This body holding me reminds me of my own mortality Embrace this moment, remember We are eternal, all this pain is an illusion ~MJKeenan

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)