The 'What the fuck!' thread

[xoxoxoBruce]

Originally Posted by Diaphone Jim

As slides go, that is a 1 or 2 on a scale of 10. Maybe 200 feet across on a mild slope.
There must be (or have been) some compelling reason to build that dramatic overkill of a pier to solve a minor problem.

My guess would be to keep it out of the way of construction equipment. The Japs fix roads super fast, like when an earthquake opens it up in no more than a day or two it's open. It took four months to get that detour up so I'm guessing they're planning more than bulldoze the right of way and a little stabilization.

Originally Posted by Griff

Wolverine

Exactly, ripped out.

[glatt]

Originally Posted by Carruthers

Disc harrow on the back of a tractor in upright stowed position?

I think Carruthers is on the right track. Maybe not the discs, but the hook shaped chisels of a cultivator that break up the big chunks before the discs really do the job.

[Diaphone Jim]

Another translated tweet about Hwy 305.

"In the photo, you can see that the original road is full of mud, and the car can't pass. However, the "mountain does not turn around", the authorities actually came up with a "匚-shaped bridge" to solve the problem! After 4 months, this special bridge was completed."

Not on tweet:
"Fix my road!" "Hai, Toranaga sama."

[Gravdigr]

Originally Posted by xoxoxoBruce

Exactly, ripped out.

By what?

[xoxoxoBruce]

I don't know what, definitely not a harrow, and the cultivator tine are spring loaded so I doubt they would do that, especially at the door jambs. An unrequited air chisel could.

[Diaphone Jim]

Now that car is keyed!
Or?:
https://xtremedigitalgraphix.com/pro...phic-decal-set

[Gravdigr]

Originally Posted by xoxoxoBruce

An unrequited air chisel could.

From inside the car, of course.

[Undertoad]

Originally Posted by Diaphone Jim

Or?:
https://xtremedigitalgraphix.com/pro...phic-decal-set

Good find!

[xoxoxoBruce]

Originally Posted by Gravdigr

From inside the car, of course.

Oh, so you don't know how an air chisel works. It would pierce and rip up like Wolverine's claw, not push out from inside.

I don't think a decal would break the rearmost side window.

[xoxoxoBruce]

Looks like Russianish...

[Gravdigr]

Originally Posted by xoxoxoBruce

No, that metal was ripped out, not pushed in.

Originally Posted by xoxoxoBruce

Oh, so you don't know how an air chisel works. It would pierce and rip up like Wolverine's claw, not push out from inside.

Pick one.

[xoxoxoBruce]

Both. The metal was ripped out from the outside. There is no inside involved. You don't run your finger through the frosting from inside the cake.

[xoxoxoBruce]

Dali was strange but what about the people who bought this limited edition chair?

[beauregaardhooligan]

whereAs the Scots are a little more practical.

[Gravdigr]

Originally Posted by xoxoxoBruce

Both. The metal was ripped out from the outside. There is no inside involved. You don't run your finger through the frosting from inside the cake.

How did it rip out, if it wasn't pushed in?