Building a bandsaw on the cheap from mostly scrap wood

[glatt]

Gluing up some more



Laying out the lines for the rear plywood piece. This has to fit over the wheel and axle, so has notches cut out of it. I cut it out on the band saw.



The motor was hanging off the end of the shelf. I guess the plans were designed for a different motor shape. I needed to extend the length of the shelf.



and here you can see that I have changed the pulley to slow the blade speed down to the speed I want. So you can add $10 to the cost. I still need to actually bolt the motor down, but first I want to finish any tuning I need to do of the saw.