Harley Question:

plthijinx · 11-10-2013, 03:47 PM

i'm puzzled. anyone here know how to work on Harleys? the following is what i posted to my fb page

so for the last two days i've been working on a friends '85 Harley 1100 sportster. have shifting issues. just ordered a shop manual for it but am curious....anyone out there know how/why it would take at least a half a turn on the shifter shaft to hit the next gear? doesn't matter which way you want to go...ie...up shift or down shift. something on the inside isn't right.

also, i should point out that you can either push or pull the shifter lever and it will stay in place most of the time. depends on where it is in the travel of that 1/2 turn of the shifter shaft during adjustment......

god i hate to say this.....TW? got any pointers?

Gravdigr · 11-17-2013, 04:01 PM

I assume you've gotten all the slop out of the linkage/s and the shift rod? Just a little slop in each of a few areas will add up to a lot of slop.

Would rotating the foot lever and/or the shift lever over a spline or two on their respective shafts make any difference? No broken/missing splines?

Is there the equivalent of automotive shifter bushings inside there that may have worn with age? If so, they're prolly not too hard to get at.

I don't know what the 'normal' travel is here, so, I'm not much hep. Plus, you're a little more mechanically inclined than me, I'm pretty sure...

Gravdigr · 11-17-2013, 04:04 PM

Quote:

Originally Posted by plthijinx

god i hate to say this.....TW? got any pointers?

Gravdigr · 11-25-2013, 05:29 PM

So...

Any luck?

Gravdigr · 02-13-2015, 03:44 PM

Ya know what? Nevermind. I don't even wanna know now.

plthijinx · 02-18-2015, 02:38 PM

oh heck no, guy came and picked it up and took it back up north and had to split the cases to replace the shaft that changes the gear. sorry, been awhile since i logged in bro

Gravdigr · 02-18-2015, 02:47 PM

Good to hear from ya, Philthy!

plthijinx · 02-18-2015, 03:19 PM

yeah it's been a while. Lots has happened. will update after work....

Gravdigr · 02-18-2015, 03:28 PM

Cool.

plthijinx · 02-18-2015, 04:55 PM

lessee here....just to sum it up:

drove to Phoenix for my birthday / poker tournament at the talking stick resort

got engaged in september i think it was

changed my job status from inside contractor to outside contractor (meaning I work from home now)

had Case draw a portrait of a pic that Leigh and I had taken at the Marriot in the Buttes while in Phoenix that turned out AWESOME!

got married 12/31/14

breathed a sigh of relief when work extended my contract, I was stressing out on that one over Christmas

moved into my wife's house across town from where I used to live only to wait for the lease to be up so we can buy back down where I used to live lol! (she had signed a two year lease so we're kinda stuck

gave my 90 gallon aquarium to a buddy last weekend but kept the fish and coral along with the new light I bought a year ago that fits on top of my 125 gallon here at the house (it needs LOTS of work i.e. - more live rock and fish

and that's about it. one thing did happen a few weeks ago that would have shattered my life but all i'll say is things worked/are working out.

How you been bro?

Clodfobble · 02-18-2015, 08:36 PM

Congratulations, Fred!

fargon · 02-18-2015, 09:39 PM

WSS^^^

DanaC · 02-19-2015, 03:39 AM

Congrats on your wedding philthy! Nice to see you about

infinite monkey · 02-19-2015, 06:21 AM

Philthy! My good man! Congratulations on your marriage and everything.

It was also nice to hear Case is still around doing her art...I was just thinking about her the other day!

Stay in touch, will ya?

Gravdigr · 02-19-2015, 12:49 PM

Quote:

Originally Posted by plthijinx

got married 12/31/14

Whaaaaaaaaaaaaaaaaaathefuck?!

I'm gonna miss you.

Seriously, man congrats on the nuptials!!

11-10-2013, 03:47 PM	#1
plthijinx Master Dwellar Join Date: Aug 2003 Posts: 4,197	Harley Question: i'm puzzled. anyone here know how to work on Harleys? the following is what i posted to my fb page so for the last two days i've been working on a friends '85 Harley 1100 sportster. have shifting issues. just ordered a shop manual for it but am curious....anyone out there know how/why it would take at least a half a turn on the shifter shaft to hit the next gear? doesn't matter which way you want to go...ie...up shift or down shift. something on the inside isn't right. also, i should point out that you can either push or pull the shifter lever and it will stay in place most of the time. depends on where it is in the travel of that 1/2 turn of the shifter shaft during adjustment...... god i hate to say this.....TW? got any pointers? Attached Images __________________ For your dreams to come true, you must first have a dream.

11-17-2013, 04:01 PM	#2
Gravdigr The Un-Tuckian Join Date: Apr 2007 Location: South Central...KY that is Posts: 39,517	I assume you've gotten all the slop out of the linkage/s and the shift rod? Just a little slop in each of a few areas will add up to a lot of slop. Would rotating the foot lever and/or the shift lever over a spline or two on their respective shafts make any difference? No broken/missing splines? Is there the equivalent of automotive shifter bushings inside there that may have worn with age? If so, they're prolly not too hard to get at. I don't know what the 'normal' travel is here, so, I'm not much hep. Plus, you're a little more mechanically inclined than me, I'm pretty sure... __________________ These statements have not been evaluated by the FDA, EPA, FBI, DEA, CDC, or FDIC. These statements are not intended to diagnose, cause, treat, cure, or prevent any disease. If you feel you have been harmed/offended by, or, disagree with any of the above statements or images, please feel free to fuck right off.

11-25-2013, 05:29 PM	#4
Gravdigr The Un-Tuckian Join Date: Apr 2007 Location: South Central...KY that is Posts: 39,517	So... Any luck? __________________ These statements have not been evaluated by the FDA, EPA, FBI, DEA, CDC, or FDIC. These statements are not intended to diagnose, cause, treat, cure, or prevent any disease. If you feel you have been harmed/offended by, or, disagree with any of the above statements or images, please feel free to fuck right off.

02-13-2015, 03:44 PM	#5
Gravdigr The Un-Tuckian Join Date: Apr 2007 Location: South Central...KY that is Posts: 39,517	Ya know what? Nevermind. I don't even wanna know now. __________________ These statements have not been evaluated by the FDA, EPA, FBI, DEA, CDC, or FDIC. These statements are not intended to diagnose, cause, treat, cure, or prevent any disease. If you feel you have been harmed/offended by, or, disagree with any of the above statements or images, please feel free to fuck right off.

02-18-2015, 02:38 PM	#6
plthijinx Master Dwellar Join Date: Aug 2003 Posts: 4,197	oh heck no, guy came and picked it up and took it back up north and had to split the cases to replace the shaft that changes the gear. sorry, been awhile since i logged in bro __________________ For your dreams to come true, you must first have a dream.

02-18-2015, 02:47 PM	#7
Gravdigr The Un-Tuckian Join Date: Apr 2007 Location: South Central...KY that is Posts: 39,517	Good to hear from ya, Philthy! __________________ These statements have not been evaluated by the FDA, EPA, FBI, DEA, CDC, or FDIC. These statements are not intended to diagnose, cause, treat, cure, or prevent any disease. If you feel you have been harmed/offended by, or, disagree with any of the above statements or images, please feel free to fuck right off.

02-18-2015, 03:19 PM	#8
plthijinx Master Dwellar Join Date: Aug 2003 Posts: 4,197	yeah it's been a while. Lots has happened. will update after work.... __________________ For your dreams to come true, you must first have a dream.

02-18-2015, 03:28 PM	#9
Gravdigr The Un-Tuckian Join Date: Apr 2007 Location: South Central...KY that is Posts: 39,517	Cool. __________________ These statements have not been evaluated by the FDA, EPA, FBI, DEA, CDC, or FDIC. These statements are not intended to diagnose, cause, treat, cure, or prevent any disease. If you feel you have been harmed/offended by, or, disagree with any of the above statements or images, please feel free to fuck right off.

02-18-2015, 04:55 PM	#10
plthijinx Master Dwellar Join Date: Aug 2003 Posts: 4,197	lessee here....just to sum it up: drove to Phoenix for my birthday / poker tournament at the talking stick resort got engaged in september i think it was changed my job status from inside contractor to outside contractor (meaning I work from home now) had Case draw a portrait of a pic that Leigh and I had taken at the Marriot in the Buttes while in Phoenix that turned out AWESOME! got married 12/31/14 breathed a sigh of relief when work extended my contract, I was stressing out on that one over Christmas moved into my wife's house across town from where I used to live only to wait for the lease to be up so we can buy back down where I used to live lol! (she had signed a two year lease so we're kinda stuck gave my 90 gallon aquarium to a buddy last weekend but kept the fish and coral along with the new light I bought a year ago that fits on top of my 125 gallon here at the house (it needs LOTS of work i.e. - more live rock and fish and that's about it. one thing did happen a few weeks ago that would have shattered my life but all i'll say is things worked/are working out. How you been bro? __________________ For your dreams to come true, you must first have a dream.

02-18-2015, 08:36 PM	#11
Clodfobble UNDER CONDITIONAL MITIGATION Join Date: Mar 2004 Location: Austin, TX Posts: 20,012	Congratulations, Fred! __________________ My book My other book My spirit animal

02-18-2015, 09:39 PM	#12
fargon Person who doesn't update the user title Join Date: Dec 2005 Location: La Crosse, WI Posts: 8,924	WSS^^^ __________________ Annoy the ones that ignore you!!! I live a blessed life I Love my Country, I Fear the Government!!! Heavily medicated for the good of mankind.

02-19-2015, 06:21 AM	#14
infinite monkey Person who doesn't update the user title Join Date: Mar 2011 Posts: 13,002	Philthy! My good man! Congratulations on your marriage and everything. It was also nice to hear Case is still around doing her art...I was just thinking about her the other day! Stay in touch, will ya?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)